SQL and PL/SQL Interview questions-II

SQL and PL/SQL Interview questions-II

 

54. What is difference between CHAR and VARCHAR2? What is the maximum SIZE allowed for each type?
CHAR pads blank spaces to the maximum length.
VARCHAR2 does not pad blank spaces.
For CHAR the maximum length is 255 and 2000 for VARCHAR2.

55. How many LONG columns are allowed in a table? Is it possible to use LONG columns in WHERE clause or ORDER BY?
Only one LONG column is allowed. It is not possible to use LONG column in WHERE or ORDER BY clause.

56. What are the pre-requisites to modify datatype of a column and to add a column with NOT NULL constraint?
- To modify the datatype of a column the column must be empty.
- To add a column with NOT NULL constrain, the table must be empty.

57. Where the integrity constraints are stored in data dictionary?
The integrity constraints are stored in USER_CONSTRAINTS.

58. How will you activate/deactivate integrity constraints?
The integrity constraints can be enabled or disabled by ALTER TABLE ENABLE CONSTRAINT / DISABLE CONSTRAINT.
59. If unique key constraint on DATE column is created, will it validate the rows that are inserted with SYSDATE?
It won't, Because SYSDATE format contains time attached with it.

60. What is a database link?
Database link is a named path through which a remote database can be accessed.

60. How to access the current value and next value from a sequence? Is it possible to access the current value in a session before accessing next value?
Sequence name CURRVAL, sequence name NEXTVAL. It is not possible. Only if you access next value in the session, current value can be accessed.

60.What is CYCLE/NO CYCLE in a Sequence?
CYCLE specifies that the sequence continue to generate values after reaching either maximum or minimum value. After pan-ascending sequence reaches its maximum value, it generates its minimum value. After a descending sequence reaches its minimum, it generates its maximum.
NO CYCLE specifies that the sequence cannot generate more values after reaching its maximum or minimum value.

61. What are the advantages of VIEW?
- To protect some of the columns of a table from other users.
- To hide complexity of a query.
- To hide complexity of calculations.

62. Can a view be updated/inserted/deleted? If Yes - under what conditions?
A View can be updated/deleted/inserted if it has only one base table if the view is based on columns from one or more tables then insert, update and delete is not possible.

63. If a view on a single base table is manipulated will the changes be reflected on the base table?
If changes are made to the tables and these tables are the base tables of a view, then the changes will be reference on the view.
64. Which of the following statements is true about implicit cursors?
1. Implicit cursors are used for SQL statements that are not named.
2. Developers should use implicit cursors with great care.
3. Implicit cursors are used in cursor for loops to handle data processing.
4. Implicit cursors are no longer a feature in Oracle.

65. Which of the following is not a feature of a cursor FOR loop?
1. Record type declaration.
2. Opening and parsing of SQL statements.
3. Fetches records from cursor.
4. Requires exit condition to be defined.

66. A developer would like to use referential datatype declaration on a variable. The variable name is EMPLOYEE_LASTNAME, and the corresponding table and column is EMPLOYEE, and LNAME, respectively. How would the developer define this variable using referential datatypes?
1. Use employee.lname%type.
2. Use employee.lname%rowtype.
3. Look up datatype for EMPLOYEE column on LASTNAME table and use that.
4. Declare it to be type LONG.

67. Which three of the following are implicit cursor attributes?
1. %found
2. %too_many_rows
3. %notfound
4. %rowcount
5. %rowtype

68. If left out, which of the following would cause an infinite loop to occur in a simple loop?
1. LOOP
2. END LOOP
3. IF-THEN
4. EXIT
69. Which line in the following statement will produce an error?
1. cursor action_cursor is
2. select name, rate, action
3. into action_record
4. from action_table;
5. There are no errors in this statement.

70. The command used to open a CURSOR FOR loop is
1. open
2. fetch
3. parse
4. None, cursor for loops handle cursor opening implicitly.

71. What happens when rows are found using a FETCH statement
1. It causes the cursor to close
2. It causes the cursor to open
3. It loads the current row values into variables
4. It creates the variables to hold the current row values

72. Read the following code:
10. CREATE OR REPLACE PROCEDURE find_cpt
11. (v_movie_id {Argument Mode} NUMBER, v_cost_per_ticket {argument mode} NUMBER)
12. IS
13. BEGIN
14. IF v_cost_per_ticket > 8.5 THEN
15. SELECT cost_per_ticket
16. INTO v_cost_per_ticket
17. FROM gross_receipt
18. WHERE movie_id = v_movie_id;
19. END IF;
20. END;
Which mode should be used for V_COST_PER_TICKET?
1. IN
2. OUT
3. RETURN
4. IN OUT
73. Read the following code:
22. CREATE OR REPLACE TRIGGER update_show_gross
23. {trigger information}
24. BEGIN
25. {additional code}
26. END;

The trigger code should only execute when the column, COST_PER_TICKET, is greater than $3. Which trigger information will you add?

1. WHEN (new.cost_per_ticket > 3.75)
2. WHEN (:new.cost_per_ticket > 3.75
3. WHERE (new.cost_per_ticket > 3.75)
4. WHERE (:new.cost_per_ticket > 3.75)

74. What is the maximum number of handlers processed before the PL/SQL block is exited when an exception occurs?
1. Only one
2. All that apply
3. All referenced
4. None

77. For which trigger timing can you reference the NEW and OLD qualifiers?
1. Statement and Row 2. Statement only 3. Row only 4. Oracle Forms trigger

78. Read the following code:
CREATE OR REPLACE FUNCTION get_budget(v_studio_id IN NUMBER)
RETURN number IS

v_yearly_budget NUMBER;

BEGIN
SELECT yearly_budget
INTO v_yearly_budget
FROM studio
WHERE id = v_studio_id;

RETURN v_yearly_budget;
END;
Which set of statements will successfully invoke this function within SQL*Plus?
1. VARIABLE g_yearly_budget NUMBER
EXECUTE g_yearly_budget := GET_BUDGET(11);
2. VARIABLE g_yearly_budget NUMBER
EXECUTE :g_yearly_budget := GET_BUDGET(11);
3. VARIABLE :g_yearly_budget NUMBER
EXECUTE :g_yearly_budget := GET_BUDGET(11);
4. VARIABLE g_yearly_budget NUMBER

31. CREATE OR REPLACE PROCEDURE update_theater
32. (v_name IN VARCHAR v_theater_id IN NUMBER) IS
33. BEGIN
34. UPDATE theater
35. SET name = v_name
36. WHERE id = v_theater_id;
37. END update_theater;
79. When invoking this procedure, you encounter the error:
ORA-000: Unique constraint(SCOTT.THEATER_NAME_UK) violated.
How should you modify the function to handle this error?
1. An user defined exception must be declared and associated with the error code and handled in the EXCEPTION section.
2. Handle the error in EXCEPTION section by referencing the error code directly.
3. Handle the error in the EXCEPTION section by referencing the UNIQUE_ERROR predefined exception.
4. Check for success by checking the value of SQL%FOUND immediately after the UPDATE statement.

80. Read the following code:
40. CREATE OR REPLACE PROCEDURE calculate_budget IS
41. v_budget studio.yearly_budget%TYPE;
42. BEGIN
43. v_budget := get_budget(11);
44. IF v_budget < 30000
45. THEN
46. set_budget(11,30000000);
47. END IF;
48. END;

You are about to add an argument to CALCULATE_BUDGET. What effect will this have?
1. The GET_BUDGET function will be marked invalid and must be recompiled before the next execution.
2. The SET_BUDGET function will be marked invalid and must be recompiled before the next execution.
3. Only the CALCULATE_BUDGET procedure needs to be recompiled.
4. All three procedures are marked invalid and must be recompiled.

81. Which procedure can be used to create a customized error message?
1. RAISE_ERROR
2. SQLERRM
3. RAISE_APPLICATION_ERROR
4. RAISE_SERVER_ERROR

82. The CHECK_THEATER trigger of the THEATER table has been disabled. Which command can you issue to enable this trigger?
1. ALTER TRIGGER check_theater ENABLE;
2. ENABLE TRIGGER check_theater;
3. ALTER TABLE check_theater ENABLE check_theater;
4. ENABLE check_theater;

83. Examine this database trigger
52. CREATE OR REPLACE TRIGGER prevent_gross_modification
53. {additional trigger information}
54. BEGIN
55. IF TO_CHAR(sysdate, DY) = MON
56. THEN
57. RAISE_APPLICATION_ERROR(-20000,Gross receipts cannot be deleted on Monday);
58. END IF;
59. END;

This trigger must fire before each DELETE of the GROSS_RECEIPT table. It should fire only once for the entire DELETE statement. What additional information must you add?
1. BEFORE DELETE ON gross_receipt
2. AFTER DELETE ON gross_receipt
3. BEFORE (gross_receipt DELETE)
4. FOR EACH ROW DELETED FROM gross_receipt